Dixon Aficio 1515 - Manual (Page 512)

Using Fax with Computers
58
5
Editing Receiver's Fax Information Via
Web Browser
W h e n t h e r e c e i v e r b e i n g p r o -
grammed or added to the address
book is a T.37 full mode compatible
type with the Internet Fax function,
you can set the following receiver's
fax information using a Web browser.
• Compression type
• Paper size
• Resolution
Preparation
Before programming, check the re-
ceiver's fax information.
Note
❒ For details, see Help using the Web
browser.
❒ When the receiver's fax informa-
tion is sent back from a T.37 full
mode compatible receiver after
transmitting an Internet Fax docu-
ment, pre-existing fax information
is overwritten.
❒ Originals are sent at A4 size, even
if A3 or B4 JIS is selected as the pa-
per size using the Web browser.
Reference
p.43 “T.37 Full Mode”, Facsimile
Reference
AAAA
Start up the Web browser on a
computer connected to the ma-
chine.
BBBB
In the [Address] box, enter the fol-
lowing characters, and then press
the
{{{{Enter}}}} key of the keyboard:
h t t p : / / x x x . x x x . x x x . x x x
("xxx.xxx.xxx.xxx"= machine's IP
address)
Top Page appears.
CCCC
Click [Administrator Mode], and then
enter the user name and password.
DDDD
Click [Address Book] on the left.
The [Address List] page appears.
EEEE
Set the Internet Fax data format.
When the programmed receiver's
fax information changes
A Click the radio button to select
the registration number you
want to change, and then click
[Change]
.
The [Change User] page appears.
StellaC2-AEcombine-F_FM.book Page 58 Tuesday, January 13, 2004 1:22 PM