beautypg.com

Dixon Aficio 1515 User Manual

Page 361

background image

Troubleshooting

71

7

[Error has occurred in the scanner driver.]

• Check whether the network cable is con-

nected correctly to the client computer.

• Check whether the Ethernet board of

the client computer is recognized cor-
rectly by Windows.

• Check whether the client computer can

use the TCP/IP protocol.

[Fatal error has occurred in the scanner.]

An unrecoverable error has occurred in the
machine. Call your service representative.

[Insufficient memory. Close all other applications, then
restart scanning.]

Close all the unnecessary applications run-
ning on the client computer.

[Insufficient memory. Reduce the scanning area.]

• Reset the scan size.

• Lower the resolution.

• Set with no compression. See p.14

“Send Settings”.

Note

❒ When a paper misfeed occurs in the ma-

chine during printing, scanning cannot
be performed. In this case, after the mis-
fed paper has been removed, proceed
with scanning.

[Invalid Winsock version. Please use version 1.1 or high-
er.]

Reinstall the operating system of the com-
puter or copy Winsock from the operating
system CD-ROM.

[No response from the scanner.]

• Check whether the machine is connect-

ed to the network correctly.

• The network is crowded. Wait for a

while, and then try to reconnect.

[No User Code is registered. Consult your system ad-
ministrator.]

Access is restricted with user codes. Consult
the system administrator of the machine.

[Please call your service representative.]

An unrecoverable error has occurred in the
machine. Call your service representative.

[Scanner is in use for other function. Please wait.]

A function of the machine other than the
scanner function is being used such as the
copier function. Wait for a while and recon-
nect.

[Scanner is not available. Check the scanner connec-
tion status.]

• Check whether the main power switch

of the machine is turned off.

• Check whether the machine is connect-

ed to the network correctly.

• Deselect the personal firewall function

of the client computers.

[Scanner is not ready. Check the scanner and the options.]

Check whether the ADF cover is closed.

[The name is already in use. Check the registered
names.]

You tried to register a name that is already
in use. Use another name.

Message

Causes and solutions