Dixon Aficio 1515 - Manual (Page 521)

Accessing User Tools (Facsimile Features)
67
6
• Print TX Status Report (Print
Transmission Status Report)
• Manual E-mail Reception
A Select User Function key you
want to program.
B Select the function you want to
program in the User Function
key, and then press the
{{{{OK}}}}
key.
Reception Settings
❖ ❖ ❖ ❖ Switch Reception Mode
Specify the method for receiving
fax messages.
• Manual Reception
• Auto Reception
❖ ❖ ❖ ❖ RX Mode Auto Switch Time
In Auto Select mode, the machine
rings a number of times to give
you the chance to pick up the
handset before taking the call auto-
matically. You can change the
number of rings with the Auto
Ring Time.
A Select [RX Mode Auto Switch Time]
using
{{{{U U U U}}}} or {{{{T T T T}}}} and then press
the {{{{OK}}}} key.
B Enter the number of rings using
the number keys, and then
press the
{{{{OK}}}} key.
Note
❒ The maximum number of
rings is be 99.
C Press the {{{{OK}}}} key.
❖ ❖ ❖ ❖ Authorized Reception
Specify whether or not unwanted
fax messages are to be screened
out.
• On
• Off
❖ ❖ ❖ ❖ Forwarding
Specify whether or not received
fax messages are to be forwarded
to a programmed receiver.
• On
• Off
❖ ❖ ❖ ❖ Checkered Mark
Specify whether or not a checkered
mark is to be printed on the first
page of received fax messages.
• On
• Off
❖ ❖ ❖ ❖ Center Mark
Specify whether or not a center
mark is to be printed halfway
down the left side and at the top
center of each page received.
• On
• Off
❖ ❖ ❖ ❖ Print Reception Time
Specify whether or not received
date and time are to be printed at the
bottom of received fax messages.
• On
• Off
StellaC2-AEcombine-F_FM.book Page 67 Tuesday, January 13, 2004 1:22 PM