Gasboy Fuel Point PLUS Vehicle - Manual (Page 98)

Fuel Point PLUS Vehicle Installation and Configuration Manual 98
4-5.1.
Setting DP-Heavy Vehicle Interface Communication Parameters
Table 4-12 shows default and alternative values for DP-vehicle interface communication parameters
described above.
Table 4-12. DP – Heavy Vehicle Interfaces Communication Parameters Values
Parameter
J1587 J1939
Default Alternative Default Alternative
Odometer Adr 255 128 255 0
DP Odo Adr 141 171, 179, 180 24 -
E.H Adr 255 128 255 0
DP E.H Adr 141 171, 179, 180 24 -
E.H PID 247 246 229
In cases where Odometer and Engine Hour readings are not obtained using default values proceed
as follows:
Odometer reading:
If Odometer reading is 0/ fails: Change DP Odo Adr to one of the alternative values shown
above
Engine Hour reading:
If E.H. reading fails: Change DP E.H Adr to one of the alternative values shown above
If E.H. reading still fails – change E.H PID to 246