Gasboy Fuel Point PLUS Vehicle - Manual (Page 108)

Fuel Point PLUS Vehicle Installation and Configuration Manual 108
Step Display Description/Action
24 This screen is displayed only in cases where
Odometer reading was not disabled.
Edit the parameter, entering the value displayed
on the dashboard
25 This screen is displayed only in cases where
E.H. reading was not disabled.
Edit the parameter, entering the value displayed
on the dashboard (if available)
If programming μDP (not μDP+), proceed to
Step 34
26 Error codes collection option. Default: N
Press ENTER to leave the option disabled
Change default to Y to enable the option
27 Idle Time collection option. Default: N
Press ENTER to leave the option disabled.
In this case, proceed to step 29
Change default to Y to enable the option
28 Idle Time Threshold. Default: Five minutes. Save
or edit the parameter and save
29 Over Speed collection option. Default: N
Press ENTER to leave the option disabled.
In this case, proceed to step 31 for
μDP+ Can or to step 33 for μDP+ K-
Line
Change default to Y to enable the option
30 Over Speed Threshold. Default: 70 miles/113
Km. Save or edit the parameter and save
31 This parameter is available for μDP+ Can.
Over RPM collection option. Default: N
Press ENTER to leave the option disabled.