Gasboy Fuel Point PLUS Vehicle User Manual
Page 63
Fuel Point PLUS Vehicle Installation and Configuration Manual
63
SECTION 4
PROGRAMMING VEHICLE UNITS
4-1.
GENERAL
This section provides instructions on the programming sequence of the vehicle units installed in
private and heavy duty vehicles using the Wireless Programmer device as follows:
FR and DP/DP+ for heavy vehicles (see paragraph 4-5)
FR and DP for light vehicles (see paragraph 4-6)
FR and μDP/μDP (see paragraph 0)
In addition, this section describes the Wireless Programmer device and includes instructions for
setting up the WP and registering the device in the FHO server.
NOTE
If an error message is received when programming
FP +DP units, replace the FP unit, and use the
Replace FP option detailed below.
4-2.
WIRELESS PROGRAMMER
WARNING
Programming using the WP should be done in safe
area (Non-Hazardous location). Therefore, it should
be done prior to Fuel ring installation.
Vehicle units are programmed on-the-spot using the Wireless Programmer (WP), P/N PA04010000
(see Figure 4-1).