Gasboy Fuel Point PLUS Vehicle - Manual (Page 119)

Fuel Point PLUS Vehicle Installation and Configuration Manual 119
4-12.
CLEARING DIAGNOSTIC TROUBLE CODES (DTCS)
4-12.1.
General
Upon completion of vehicle units programming, verify that no malfunction indication appears on
the vehicle's dashboard.
It is recommended to read and erase the Diagnostic Trouble Codes using an OBD-II code scanner,
such as Memoscan's U581 OBD-II Memo Scanner (see Figure 4-14, Table 4-20) described below.
Figure 4-14. U581 OBD-II Memo Scanner
Table 4-20. U581 OBD-II Memo Scanner Controls and Main Components
No. Control/Component Description
1 LCD Display 128*64 pixel backlit display
2 Enter Key Saves selections
3 Exit Key Returns to the previous screen
4 UP/DOWN arrows Scroll up and down, changes the pointer position
5 LEFT/RIGHT arrows Accesses to submenus, changes the pointer position
6 OBD-II connector Connects between vehicle's OBD-II connector and
Memo Scanner
7 Battery Compartment Houses 9 V battery