Gasboy Fuel Point PLUS Vehicle - Manual (Page 38)

Fuel Point PLUS Vehicle Installation and Configuration Manual 38
SECTION 3
DATAPASS & µ DATAPASS DESCRIPTION & INSTALLATION
3-1.
OVERVIEW
DataPass is a miniature unit that connects to the vehicle bus and captures data from the vehicle
CPU/BUS. The data is transmitted to the nearest Wireless Gateway Terminal (WGT) in the
forecourt.
The following types are available:
µDataPass / µDataPass+: plugs into the vehicle diagnostic connector (OBD), intended for
light and commercial vehicles
DataPass / DataPass+: connected to the vehicle bus and used in light vehicles, heavy
vehicles and trucks
Table 3-1 enumerates the types of DataPass units available for heavy and light vehicles and the
compatible vehicle interfaces. The device type is recognized by the Wireless Programmer, as
well as by the WGT and OrData system.
Table 3-1. DP Types
Name DP Type Vehicle Interfaces
DP for Heavy Vehicles DP Heavy
vehicle
J1587, J1939, FMS, Pulses
DP+ for Heavy Vehicles DP Heavy
vehicle
J1587, J1939, FMS, Pulses
DP for Light Vehicles DP Light
vehicle
OBD II CAN, OBD II K
Line, Pulses
µDataPass CAN Bus µDP CAN OBD II CAN
µDataPass+ CAN Bus µDP CAN OBD II CAN
µDataPass k-line µDP K-Line OBD II K Line
µDataPass+ k-line µDP K-Line OBD II K Line
3-1.1.
Vehicle Data Provided
The basic DataPass and µDataPass units collect Odometer and Engine Hour information from the
vehicle and it is sent through the WGT network to the FHO for the fleet manager to use.