Gasboy Fuel Point PLUS Vehicle - Manual (Page 58)

Fuel Point PLUS Vehicle Installation and Configuration Manual 58
Figure 3-22. Tachograph Wiring
4. Connect ands solder each wire to its corresponding wire in the DataPass harness as shown in
Table 3-11.
Figure 3-23. Connecting DataPass Harness to Tachograph Wiring
5. Wrap each soldered wire in insulating tape (see Figure 3-24)
Figure 3-24. Wrapping Connections in Insulating Tape
6. Wrap the newly created harness in insulating tape (see Figure 3-25)