Gasboy Fuel Point PLUS Vehicle - Manual (Page 16)

Fuel Point PLUS Vehicle Installation and Configuration Manual 16
SECTION 2
FUEL RING DESCRIPTION & INSTALLATION
2-1.
OVERVIEW
Fuel Ring is a passive vehicle identification tag for refueling (RFID with no internal power sources)
which provides encrypted information on the vehicle identity, corporation or driver identification
and fuel type.
Fuel Ring includes a coil installed around the vehicle's fuel tank inlet and an ID chip. The coil
receives the transmission from the Wireless Nozzle Reader and transmits the chip information to
the Fuel Point PLUS system.
Fuel Ring features a patented removal protection mechanism to eliminate risk of theft or fraud. The
coil and the chip are connected through a cable, so that the ID chip can be installed either in a
concealed place inside the truck or next to the fuel tank inlet in light vehicles (the distance between
the coil and the ID chip must not exceed 39.37"-1M). Enhanced protection is achieved by
correlating the DataPass and the Fuel Ring of the same vehicle
The following section describes two types of installation procedures:
Installation on private vehicles (see paragraph 2-5)
Installation on heavy vehicles (see paragraph 2-6)
2-1.1.
Fuel Ring Main Components
The Fuel Ring comprises two major parts as follows:
A coil (a uniquely designed coil for Fuel Point PLUS vehicle installations)
A one-time programmed ID chip housed in a casting package, protecting the unit from
mechanical damage.
Figure 2-1. Fuel Ring Components