Gasboy Fuel Point PLUS Vehicle - Manual (Page 78)

Fuel Point PLUS Vehicle Installation and Configuration Manual 78
4-3.6.
Show Files
The Show Files option enables the technician to verify that the latest versions are stored in WP's
internal memory: WP's ARM (WP firmware) and AVR (WP antenna firmware), Vehicle Parameters
table, DP and μDP firmware (for view only).
In cases where a file is missing: File not found is displayed under the file type.
Table 4-5 describes the Show Files sequence steps.
Turn on the WP; follow the instructions appearing on the WP display, described below.
Table 4-5. Show Files Address Sequence
Step Display Description/Action
1 Enter user ID
Enter password
2 The WP Functions menu is displayed. Press the
BCK key to access the main menu
3 Use the DOWN arrow key to move the pointer
(>) to the Services menu
4 Use the UP arrow key to move the pointer (>) to
the Show Files option
5 The Vehicle Parameters update date and time is
displayed (for view only). Use the DOWN arrow
key to view the next file
The currently installed WP ARM is displayed
(for view only). Use the DOWN arrow key to
view the next file
The currently installed WP AVR is displayed
(for view only). Use the DOWN arrow key to
view the next file