Gasboy Fuel Point PLUS Vehicle - Manual (Page 19)

Fuel Point PLUS Vehicle Installation and Configuration Manual 19
Figure 2-3. Heavy Vehicle Kit Description
NOTE
To extend SuperGlue and accelerator shelf life, store
the products at a temperature of 20 0 C or less. High
temperature conditions or direct sunlight reduces
shelf life dramatically. For more details refer to
manufacturer's instructions.
2-3.
FUEL RING COILS
The following Fuel Ring coils are available to fit a wide range of fuel inlets:
2-3.1.
Shaped Coil
Designed to maintain a distance from metal surfaces, the Shaped coil (see Figure 2-4, Table 2-3)
includes an ID chip connector and three support legs which can be easily glued.
Intended for use in cases where an easy connection to the ID chip is required, mainly when the chip
is close to the Wireless Nozzle Reader, e.g. private vehicles.
The Shaped coil is connected to the ID chip by plugging the chip's connector to the coil's connector.
Table 2-3. Shaped Fuel Rings
Part Number Description
M09678B005 Shaped, 2.95"
M09678B006 Shaped,3.34"