Gasboy Fuel Point PLUS Vehicle - Manual (Page 13)

Fuel Point PLUS Vehicle Installation and Configuration Manual 13
SECTION 1
INTRODUCTION
1-1.
SCOPE
This manual is provided to assist the user in installing the Fuel Point PLUS vehicle units: Fuel Ring
and DataPass. The vehicle units must be installed as described in this manual to ensure the system
reliability and proper operation. This manual includes a general and functional description of the
vehicle units, their main components and installation requirements. The manual is intended for
qualified authorized installers and technicians of Fuel Point PLUS vehicle units and their
components.
1-2.
FUEL POINT PLUS SYSTEM DESCRIPTION
Gasboy's Fuel Point PLUS is an automated system utilized to identify vehicles refueling in gas
stations that utilizes wireless technology for transferring vehicle data. The Wireless Nozzle Reader
(WNR), a self contained unit installed on the fueling nozzle, reads the Fuel Ring using contactless
technology and transmits the encrypted data to the nearest WGT using short range, spread spectrum
wireless communication. The WGT receives both DataPass and Fuel Ring vehicle data, decrypts the
information and transmits it to the station automation system. For further information on the Fuel
Point PLUS station-side equipment, please refer to Station Installation and Setup Manual for New
Deployments, P/N MDE-4851.
Figure 1-1 shows a basic diagram of Gasboy's Fuel Point PLUS architecture.