Gasboy Fuel Point PLUS Vehicle - Manual (Page 107)

Fuel Point PLUS Vehicle Installation and Configuration Manual 107
Step Display Description/Action
16
Select additional vehicle data, if any
17 The detected DP type is displayed:
μDP+ K
μDP K
μDP+ Can
μDP Can
18 The communication protocol is displayed
depending on the μDP type
19 Odometer reading option. Default: Y
Press ENTER to collect odometer reading
Change default to N to disable the option
20 Distance measurement units' definition:
Enter 1 for Km.
Enter 2 for Miles
If Odometer reading was disabled, proceed to
step 23
21 DP Factor is displayed. Edit the parameter,
entering a known factor, if needed
22 DP Offset is displayed. Edit the parameter,
entering a known offset, if needed
23 E.H. reading option. Default: Y
Press ENTER to collect E.H. reading
Change default to N to disable the option