Gasboy Fuel Point PLUS Vehicle - Manual (Page 24)

Fuel Point PLUS Vehicle Installation and Configuration Manual 24
4. The unit is handled and carefully, avoiding mechanical pressure on the chip. Improper
handling could damage the unit and cause malfunction
5. The installation area complies with the approved location as shown in Figure 2-7. Please
note that this drawing applies to an open fuel inlet
6. Fuel Ring should only be installed when fuel inlet cover is closed.
Figure 2-7. Typical Installation Approved Location
2-5.3.
Required Tools
Cutter
Crimping tool
Pliers
A drilling machine approved for hazardous environment
2-5.4.
Installation Procedure
WARNING
Proceed as follows:
Before installing or servicing equipment, carefully
observe the warnings and precautions provided at
the beginning of this manual.
1. Ensure that the fuel tank inlet cover is closed
2. Use a Fuel Ring of optimal size (refer to Table 2-5) which can be easily placed around
the fuel tank inlet and allows the opening and closing of the fuel tank inlet cover
3. Choose an optimal and secure position for the ID chip. In cases where the installation is
performed near the fuel tank inlet, it is preferable to choose the upper part of the