Basler Electric BE1-851 - Manual (Page 361)

Step 7: Click File/Properties on the menu bar. Click the Settings tab.
a. Make the following selections using Figure C-4 as a guide:
Check the Terminal Keys radio button.
Select VT-100 emulation.
Set Backscroll buffer lines to the maximum setting of 500.
Figure C-4. Properties, Settings Tab
b. Click the ASCII Setup button. Make the following selections using Figure C-5 as a guide:
ASCII Sending
Place a check at Send line ends…
Place a check at Echo typed characters…
Select a Line delay setting of 100 to 200 milliseconds.
Set the Character delay setting to 0 milliseconds.
ASCII Receiving
Disable Append line feeds…by leaving the box unchecked.
Disable Force incoming… by leaving the box unchecked.
Place a check at Wrap lines…
c. Click “OK”.
d. Click “OK”.
Step 8: Click File and click Save.
NOTE
Settings changes do not become active until the settings are saved.
9289900990 Rev R BE1-851 Terminal Communication C-3