Basler Electric BE1-851 - Manual (Page 353)

APPENDIX B • COMMAND CROSS-REFERENCE
Introduction
This appendix lists all ASCII commands, command syntax, brief command descriptions, and any
corresponding HMI screens. Commands are organized by function in the following groups and tables:
• Miscellaneous (Table B-1)
• Metering (Table B-2)
• Control (Table B-3)
• Report (Table B-4)
• Setting (Table B-5)
• Alarm (Table B-6)
• General Setting (Table B-7)
• Breaker Monitor and Setting (Table B-8)
• Programmable Logic Setting (Table B-9)
• User Programmable Name Setting (Table B-10)
• Protection Setting (Table B-11)
• Global (Table B-12)
An entry of x in the HMI Screen column represents multiple entry possibilities such as 0, 1, 2, or 3 for
setting groups and 43, 143, 243, or 343 for virtual switches.
Table B-1. Miscellaneous Commands
ASCII Command Function HMI Screen
ACCESS[={password}]
Read/Set access level in order to change
settings.
N/A
EXIT Exit programming mode. N/A
HELP {cmd} or H {cmd} Obtain help with command operation. N/A
Table B-2. Metering Commands
ASCII Command Function HMI Screen
M Read all metered values. N/A
M-I[{phase}] Read metered current in primary unit. 3.1 - 3.2
Table B-3. Control Commands
ASCII Command Function HMI Screen
CO-{control}[={mode}] Control operation. N/A
CS-control[={mode}] Control selection. N/A
CS/CO-x43 Control virtual switches. 2.1.1 - 2.1.4
CS/CO-101 Control breaker control switch. 2.2.1
CS/CO-GROUP Control group. 2.3.1
CS/CO-OUTn Control output n. 2.4.1
Table B-4. Report Commands
ASCII Command Function HMI Screen
RA[=0] Report/Reset alarm information. 1.3
RA-LGC[=0] Report/Reset logic alarm information. N/A
RA-MAJ[=0] Report/Reset major alarm information. N/A
RA-MIN[=0] Report/Reset minor alarm information. N/A
RA-REL[=0] Report/Reset relay alarm information. N/A
RB Read breaker status. 4.3.1 - 4.3.2
RB-DUTY[{phase}[={%duty}]] Read/Set breaker contact duty log. 4.3.2
9289900990 Rev R BE1-851 Command Cross-Reference B-1