Basler Electric BE1-851 - Manual (Page 252)

RB Command
Purpose: Read breaker status
Syntax: RB
Example: RB
Reference: Section 6, Reporting and Alarms, Breaker Monitoring
RB-DUTY Command
Purpose: Read/Set breaker contact Duty Log
Syntax: RB-DUTY[{phase}[={%duty}]] where %duty is % of dmax set with SB-DUTY
Example: RB-DUTYA or RB-DUTYB=50
Reference: Section 6, Reporting and Alarms, Breaker Monitoring
RB-OPCNTR Command
Purpose: Read/Set Breaker Operation Counter
Syntax: RB-OPCNTR[={#operations}]
Example: RB-OPCNTR=32 or RB-OPCNTR=652
Reference: Section 6, Reporting and Alarms, Breaker Monitoring
RD Command
Purpose: Report all demand data
Syntax: RD
Example: RD
Reference: Section 6, Reporting and Alarms, Demand Functions
RD-PI Command
Purpose: Read/Reset peak demand current (I)
Syntax: RD-PI[{p}[=0]] where p=A/B/C/N/Q
Example: RD-PI or RD-PIA or RD-PIN or RD-PI=0
Reference: Section 6, Reporting and Alarms, Demand Functions
RD-TI Command
Purpose: Report today's demand current (I)
Syntax: RD-TI[{p}] where p=A/B/C/N/Q
Example: RD-TI or RD-TIA or RD-TIN
Reference: Section 6, Reporting and Alarms, Demand Functions
RD-YI Command
Purpose: Report yesterday's demand current (I)
Syntax: RD-YI[{p}] where p=A/B/C/N/Q
Example: RD-YI or RD-YIA or RD-YIN
Reference: Section 6, Reporting and Alarms, Demand Functions
RF Command
Purpose: Read/Reset Fault Report Data
Syntax: RF[-n/NEW][=0]
Example: RF (displays a directory of all fault reports in memory)
RF-23 (view summary report for fault record 23)
RF-NEW (view summary report for newest fault record since RF=0 reset)
RF=TRIG (Manually Trigger a fault record)
RF=0 (reset NEW fault counter)
Reference: Section 6, Reporting and Alarms, Fault Reporting
11-10 BE1-851 ASCII Command Interface 9289900990 Rev R