Basler Electric BE1-851 - Manual (Page 355)

ASCII Command Function HMI Screen
SG-CT[t][={CT_ratio}] Read/Set Phase/Neutral CT ratio. 6.3.1
SG-DI[p][={interval}]
Read/Set P(IA/IB/IC/var/watt), N and Q
demand interval.
N/A
SG-DSP[P/N][=A/F/R] Read analog signal dsp filter type. N/A
SG-DST[=1/2] Read/Set Daylight Saving Time type. N/A
SG-DSTSTART[={Mo,D,H,M,O}]
Read/Set settings for start of Daylight
Saving Time.
N/A
SG-DSTSTOP[={Mo,D,H,M,O}]
Read/Set settings for end of Daylight
Saving Time.
N/A
SG-FREQ[={freq(HZ)}] Read/Enter power system frequency. 6.3.2
SG-HOLD[n][={1/0 hold ena}] Read/Program output hold operation. N/A
SG-ID[={relayID(up to 30 char)},{StationID(up to 30
char)}]
Read/Set relay ID and station ID used in
reports.
N/A
SG-IN[#[={r(ms)},{db(ms)}]] Read/Set input recognition/debounce. N/A
SG-SCREEN[n][={default screen number}] Read/Set default screen(s). N/A
SG-SGCON[={time}] Read/Set SGC output time. N/A
SG-TARG[={x/x/..x},{rst TARG logic}]
Report/Enable Target list and Reset
Target logic.
N/A
SG-TRIGGER[={TRIP trigger},{PU trigger},
{LOGIC trigger}]
Read/Set trigger logic. N/A
SG-UTC[=M,R,B]
Read/Set UTC information for Daylight
Saving Time.
N/A
Table B-8. Breaker Monitoring and Setting Commands
ASCII Command Function HMI Screen
SB Read all breaker settings. N/A
SB-DUTY[={mode},{dmax},{BLKBKR logic}] Read/Set breaker contact duty. N/A
SB-LOGIC[={breaker close logic}] Read/Set breaker contact logic. N/A
Table B-9. Programmable Logic Setting Commands
ASCII Command Function HMI Screen
SL:[{name}] Obtain setting logic information. N/A
SL-x50T[{p}[={mode},{BLK logic}]] Read/Set logic for 50 function modules. N/A
SL-x51[{p}[={mode},{BLK logic}]] Read/Set logic for 51 function modules. N/A
SL-{f}62[={mode},{INI logic},{BLK logic}] Read/Set logic for 62 function modules. N/A
SL-79[={mode},{RI logic},{STATUS logic},
{WAIT logic},{LOCKOUT logic}]
Read/Set for 79 function. N/A
SL-BF[{p}[={mode},{INI logic},{BLK logic}]]
Read/Set logic for breaker failure function
modules.
N/A
SL-GROUP[={mode},{D0logic},{D1logic},{D2logic},
{D3logic},{AUTOlogic}]
Read/Set logic for setting group module. N/A
SL-N[={name}]
Read, set, or copy the name of the
custom logic.
N/A
SL-VO[x[={Boolean equation}]] Read/Set output logic. N/A
SL-{x}43[=mode] Read/Set logic for Virtual Switches. N/A
SL-101[=mode]
Read/Set logic for Virtual Breaker Control
Switch.
N/A
9289900990 Rev R
BE1-851 Command Cross-Reference B-3