Basler Electric BE1-851 - Manual (Page 310)

Figure 14-5. General Operation Screen, Power System Tab
Global Security
Each of three communication ports and the four functional areas (Global, Settings, Reports, and Control)
has password security. See Figure 14-6. This allows the user to customize password protection for all
ports. For example, you could allow technicians to have global access to all three functional areas via the
front communication port. You could also restrict the rear port that is connected to a modem to read-only
access.
If you select Show Passwords and notice that the default passwords have not been changed, then you
may change all four passwords appear and can be changed. If the global password has been changed, a
dialog box appears explaining that you must enter the global password to enable viewing and editing the
existing passwords. After entering the global password, the passwords and enable boxes appear. You
may then make changes in all areas. Clicking a box for a specific communication port toggles the
functional area for that port either ON or OFF. Notice that the front panel human-machine interface (HMI)
and communications port zero are combined and considered as one.
14-6 BE1-851 BESTCOMS™ Software 9289900990 Rev R