Avery Dennison Monarch 9864 Info Printouts and Parameters - Manual (Page 98)

06/08 Rev. AB USER MANUAL Info-Printouts & Parameters
9844 - 9854 - 9864
98
Command ^JM
9864 9844 9854
¯
Interpreter version: 1.32 or higher
The ^JM command changes the printer resolution:
•
^JMA sets the resolution to the default value = printhead resolution.
• ^JMB sets the resolution to 200 dpi, if the actual resolution is 300 dpi. If the
actual resolution is 200 dpi, this command is ignored.
Disable
The resolution setting sent in the MLI print job is ignored.
Enable
The resolution setting is not ignored.