Rewinder adjust, Com2 commun. test – Avery Dennison Monarch 9864 Info Printouts and Parameters User Manual
Page 107
06/08 Rev. AB
USER MANUAL
Info-Printouts & Parameters
9844 - 9854 - 9864
107
3. Send any file to the printer, for example:
copy anyfile.txt lpt1
You see
xxxxxx is the size of the sent file in bytes. This value is calculated during the
test. The test is complete when the file size at the printer matches the size
visible in the MS-DOS window. Otherwise, transmission errors occurred.
Rewinder adjust
9864
9854
¯
Only with Rewinder 2000 installed.
Setting up the rewinder.
Use this adjustment for variations in the light barrier.
P
See the rewinder manual for more information.
Resting pos.xxx
Setup of the resting position (xxx = actual sensor value).
End pos. xxx
Setup of the End position (xxx = actual sensor value).
1. Move the dancer arm to its resting position.
2. Press Cut.
3. Move the dancer arm to its end position.
4. Press Online.
Com2 commun. test
9864
9854
¯
9864: Only with installed options board.
¯
9854: Only with installed I/O-board.
After calling this parameter, Com2 sends all data received by the Easy Plug
port.
P
If this parameter is set to RS232, data can also be sent in the reverse
direction (received by Com2, sent by Com1).
Receive test
xxxxx Bytes