Avery Dennison Monarch 9864 Info Printouts and Parameters - Manual (Page 46)

06/08 Rev. AB USER MANUAL Info-Printouts & Parameters
9844 - 9854 - 9864
46
WEB server
9864 9854
The web server may be used to
•
read out or change parameter settings of the printer into a web browser
•
Operate the printer via a web browser.
Requirements for use of the web server function:
• Printer is connected to network
•
A valid IP address is assigned to the printer (by the network administrator or
by a DHCP server)
• INTERF. PARAM. > NETWORK PARAM. > WEB server must be set to Enabled.
Starting the web server:
1. Write down the printer’s IP address ( INTERF. PARAM. > NETWORK PARAM. >
IP address ).
2. Start the web browser.
Enter the address field:
http://[IP address without leading zeros]
Example: IP address = 144.093.029.031
Input: http://144.93.29.31
3. Click Login.
4. Type in the user name (admin) and password (admin).
If the login was successful, you see the following menu items at the left
window margin:
Enabled Turns on the web server.
Disabled
Turns off the web server.
Menu item Function
Home Goes to the home page
Logout Interrupts the connection
Parameter Opens the parameter menu. By clicking on submenus and
parameters, those can be opened and the parameter settings
be changed.
¯
Some parameters cause the printer to reset if the
setting is changed at the control panel. If the parameters
are changed with the web server, this does not happen
automatically. Therefore, the modifications only become
effective after the next printer restart. A restart can be
triggered remote in the Display view.
Display view Opens the display operation panel. Enables remote operation
of the printer.
Download Opens another browser window with the URL of the FTP
server. For more information read the description of
INTERFACE PARA > NETWORK PARAM. > FTP server .
Help Help texts
[8] Functions of the web server.