Avery Dennison Monarch 9864 Info Printouts and Parameters - Manual (Page 62)

06/08 Rev. AB USER MANUAL Info-Printouts & Parameters
9844 - 9854 - 9864
62
Miss. label tol.
9864 9844 9854
Missing label tolerance
The maximum search path for gaps that cannot be located. In cases of
difficult gap detection (minimum variation in the light transparency, gap to
label), shortening the search path is recommended. This reduces label loss
from undetected gaps. Printing does not take place during the search
process.
xx
Setting range: 0 to 10; Unit interval: 1
•
Example 0 (Zero label length): A gap must be found after a printed label or
an error message appears. This setting detects every missing label.
•
Example 5 (Five label lengths): A gap must be found after a maximum of 5
label lengths or an error message appears.
Gap detect mode
9864 9844 9854
After one of the following events, the printer must search for the punch:
• After turning on the printer
• After changing the label material
Manual
The operator has to initialize the material manually by pressing Feed several
times.
Autom. Forward
(Default for printers) The material initialization is done automatically. There is
no backward movement of the material during the initialization.
Autom. feed back ¯
9864 Dispenser versions only
(Default for those devices) The material initialization is done automatically.
The label material is moved forward and backward during the initialization.
The stretch of backward movement can be set with parameter
SYSTEM
PARAMETER > Max InitFeedback (see below).
Max InitFeedback
9864
¯
9864 Dispenser versions only.
¯
Only if SYSTEM PARAMETERS > Gap detect mode = Autom. feed back.
During initialization, the label material is fed backward until the next punch/
reflex mark is reached. This parameter defines the maximum backwards
feeding length.
xx mm
Setting range: 0 to 200 mm; Step width: 1 mm; Default setting: 80 mm