Avery Dennison Monarch 9864 Info Printouts and Parameters - Manual (Page 32)

06/08 Rev. AB USER MANUAL Info-Printouts & Parameters
9844 - 9854 - 9864
32
Cut mode
9864
¯
Only with attached and enabled cutter ( SYSTEM PARAMETERS > Periph. device =
Cutter).
Defines where to cut the material.
Real 1:1 mode
The entire surface of the label is printable and the label advances to the
cutter. After the cut, the beginning of the next label is backed up under the
printhead. This reduces the output volume.
[13] Printing process in Real 1:1 Mode.
Avery
Avery
Avery
Avery
Printhead Cutter
1. Printing
2. Printing finished
3. Feeding
4. Cut and
feed back