Avery Dennison Monarch 9864 Info Printouts and Parameters - Manual (Page 79)

06/08 Rev. AB USER MANUAL Info-Printouts & Parameters
9844 - 9854 - 9864
79
OLV PARAMETERS
¯
This menu only appears when an online verifier (OLV) is connected to the
printer. For this, the parameter INTERF. PARAM. > COM2 PORT > Function Option must
be set to Barcode OLV.
Verify mode
9864
¯
Only if OLV PARAMETER > Cancel. printing = Enabled.
All bar codes All bar codes are verified according to the limits set at the printer.
¯
Easy Plug print jobs do not have to be changed when using this setting.
Easyplug select.
Only bar codes with “V” set in the command option (Easy Plug) are verified.
P Refer to the Easy Plug manual for more information on command #YB.
Ref Decode
9864
¯
Only if OLV PARAMETER > Cancel. printing = Enabled.
No Test
The bar code does not have to be decodable.
Pass
The bar code must be decodable.
Decodability
9864
¯
Only if OLV PARAMETER > Cancel. printing = Enabled.
¯
Condition: Value >= Limit.
xxx
Setting range: -1 to 100; Unit interval: 1; -1 = No checking.
Modulation
9864
¯
Only if OLV PARAMETER > Cancel. printing = Enabled.
¯
Condition: Value >= Limit.
xxx
Setting range: -1 to 100; Unit interval: 1; -1 = No checking.