Avery Dennison Monarch 9864 Info Printouts and Parameters - Manual (Page 43)

06/08 Rev. AB USER MANUAL Info-Printouts & Parameters
9844 - 9854 - 9864
43
Data synch.
9864 9854
¯
With installed I/O board only.
P See parameter Data synch. on page 40.
Frame error
9864 9854
¯
With installed I/O board only.
P See parameter Frame error on page 41.
> CENTRONICS
PnP function
9864 9844 9854
Disabled
The printer does not send any identification signals to the Centronics port.
Enabled The printer sends identification signals via the Centronics port (if any is
connected) to the host computer’s Windows operating system. Windows
searches for an appropriate driver. (Default setting).
> NETWORK PARAM.
IP addressassign
9864 9854
¯
Changing this parameter restarts the printer.
Fixed IP address
This setting activates the parameters Net mask and Gateway address (see
below).
DHCP IP address is assigned automatically. The assigned IP address is briefly
displayed on the printer while the printer starts.
IP address
9864 9854
xxx.xxx.xxx.xxx
Setting range per xxx value: 0 to 255
Change between the digits by pressing Cut or Feed. Press Online to
acknowledge the setting. After changing the IP address, the printer resets
automatically.