Avery Dennison Monarch 9864 Info Printouts and Parameters - Manual (Page 82)

06/08 Rev. AB USER MANUAL Info-Printouts & Parameters
9844 - 9854 - 9864
82
Dist. head-beam
9864
For most applications, you only need to set this parameter. The previously
listed parameters are checked automatically according to ANSI grade.
Sets the distance between the reading position of the laser beam and the
printhead.
xx mm
Setting range: 6 to 18; Unit interval: 1
Cancel. printing
9864
¯
9864: Parameter is not supported for dispenser version.
Cancel printing
Disabled
Do not cancel printing.
Enabled If no validation data exists for the printed bar code, or if the bar code exceeds
the set limits, the printed label is cancelled. The same label reprints. The
amount of reprints is set with the parameter Reprint quantity. If the error still
occurs after the defined quantity of labels are reprinted, printing stops and an
error message appears.
Reprint quantity
9864
¯
Only, if OLV PARAMETER > Cancel. printing = Enabled.
Defines the maximum amount of reprint attempts after a bar code read error.
xxx
Setting range: 0 to 10, Unit interval: 1; Default setting: 0
Verify mode
9864
Fast Standard verification mode.
Slow
Each print job is processed as if it contains counting fields. Each labels is
moved forward underneath the laser beam and backwards again. This
procedure slows the label throughput, but ensures the correct counting field
content prints after an error occurs.