Avery Dennison Monarch 9864 Info Printouts and Parameters - Manual (Page 102)

06/08 Rev. AB USER MANUAL Info-Printouts & Parameters
9844 - 9854 - 9864
102
Matend tolerance
9854
Material end tolerance
Use for label stock with very long punches. To avoid punches being
recognized as the material end by mistake, set the distance after which the
gap over the light sensor is interpreted as material end.
¯
By choosing a very high material end tolerance, you protect the print
roller.
xxx mm
Setting range: 20-300 mm; Default setting: 35 mm
Feed adjust
9844 9854
Corrects the material feed length. If very long labels are printed adjust any
feed inaccuracy caused by the feed roller slipping.
x.x %
Setting range: -10,0 to +10,0; Step width: 0.1%; Default setting: 0%
Scanner test
9864
The scanner test is required to adjust the optional scanner.
On
Turns on the Scanner Laser.
Off
Turns off the Scanner Laser.