Avery Dennison Monarch 9864 Info Printouts and Parameters - Manual (Page 31)

06/08 Rev. AB USER MANUAL Info-Printouts & Parameters
9844 - 9854 - 9864
31
Dispensposition
¯
9864: Dispenser version only.
Dispense position
Adjusts the dispense (peel) position in or out against the feed direction.
Labels stick to more or less of the backing paper based on the setting
(Fig. 11).
[12] Dispense position (stop position) of the dispensed label.
x.x mm
Setting range: -30.0 to +20.0 mm; Unit interval: 0.1 mm; Default
setting: depends on the setting of the parameter
SYSTEM PARAMETERS >
Application mode (see [6]).
The default setting takes effect in one of the following cases:
•
Factory settings
P See parameter SPECIALFUNCTION > Factory settings .
•
Alteration of the parameter setting for Application mode.
Dispensed label Dispense position
Dispensing edge
Backing paper
Z0040E
.cdr
Application mode Default setting
LTS 80/400 0.0 mm
LTS 80/200 0.0 mm
manual -6.0 mm
[6] Different default settings, depending on the value of parameter Application mode.