Avery Dennison Monarch 9864 Info Printouts and Parameters - Manual (Page 74)

06/08 Rev. AB USER MANUAL Info-Printouts & Parameters
9844 - 9854 - 9864
74
Dwell time
9864
¯
Only with Applicator Interface.
¯
Only if APPLICATOR PARA > Applicator type = PEP or PEP Blow on.
Sets the time limit when the apply cylinder valve is turned on.
xxxxx ms
Setting range: 1 to 99999 ms; Unit interval: 1 ms; Default setting: 1 ms
Blow on time
9864
¯
Only with Applicator Interface.
¯
Only if APPLICATOR PARA > Applicator type = LTP-LTPV or ASA.
xxxxx ms
Setting range: 0 to 99999 ms; Unit interval: 1 ms; Default setting: 1 ms
Restart delay
9864
¯
Only with Applicator Interface.
Sets the delay time after the application during which no start signals are
accepted.
xxxxx ms
Setting range: 0 to 99999 ms; Unit interval: 1 ms; Default setting: 0 ms
Position timeout
9864
¯
Only with Applicator Interface.
Sets the amount of time an applicator position error displays. A position error
occurs when the applicator does not reach any of its end positions within the
required time limit.
xxxxx ms Setting range: 500 to 99999 ms; Unit interval: 1 ms;
Default setting: 2000 ms