Avery Dennison Monarch 9864 Info Printouts and Parameters - Manual (Page 66)

06/08 Rev. AB USER MANUAL Info-Printouts & Parameters
9844 - 9854 - 9864
66
Printer Motor
Rewinder motor turned off. The printer behaves like a model without
dispenser option.
Dual Motors
Both motors (feed and rewinder) are enabled.
Dispenser Motor The feed motor is turned off. The rewinder motor feeds the material (Default
setting).
Signal edge
9864 9854
¯
9854: This parameter only appears when no I/O board is connected.
This parameter determines either the falling or the rising edge of an incoming
signal as trigger.
Falling edge
The falling signal edge triggers a certain printer reaction.
Rising edge The rising signal edge triggers a certain printer reaction.
Apply key
9864
¯
9864: Only if SYSTEM PARAMETER > Periph. device = Dispenser.
¯
Parameter is displayed in production mode only.
Enabled (Default) The application can be triggered by pressing Cut or Apply.
Disabled
Triggering the application by pressing Cut/Apply is not possible.
Print contrast
9864 9844 9854
xxx%
Setting range: 1 to 110120%; Unit interval: 1; Default setting: 60
CAUTION!
The parameter Print contrast directly affects the printhead life. The higher the
Print contrast setting, the lower the printhead life.
« Always choose the lowest possible setting necessary to produce an
acceptable print result.