Parameter to cf, Data blocks del, Easypl. file log – Avery Dennison Monarch 9864 Info Printouts and Parameters User Manual
Page 100

06/08 Rev. AB
USER MANUAL
Info-Printouts & Parameters
9844 - 9854 - 9864
100
Parameter to CF
9864
9844
9854
Parameter settings are saved in a text file on the CF card (directory
FORMATS\).
With adjust para
(Default) Parameters that contain specific setting are saved. The relevant
parameter names are marked with a * in the text file.
(Default file name: SETUPALL.FOR).
¯
Application example: Service
Without adj. par
Parameters that contain specific settings are not saved.
(Default file name: SETUP.FOR).
¯
Application example: Transfer printer settings to another printer (specific
settings such as printhead resistance or sensor settings should not be
overwritten).
P
See the “Sending Data” section for more information.
Data blocks del.
Delete data blocks
9864
¯
Appears only when fonts are stored in the flash memory.
No
(Default) No action.
Yes
All fonts stored in the flash memory are deleted.
EasyPl. file log
Easy Plug file log
9864
9854
¯
9864: Only visible when a CF card is loaded.
Disabled
The file log function is turned off.
All data
All received data, including immediate commands, are written into the log file.
Interpreter data
All data is written into the log file, which the Easy Plug interpreter reads out
of the reception spooler. Immediate commands are not included.