Avery Dennison Monarch 9864 Info Printouts and Parameters - Manual (Page 101)

06/08 Rev. AB USER MANUAL Info-Printouts & Parameters
9844 - 9854 - 9864
101
Log files delete
9864 9854
¯
9864: Only visible when a CF card is loaded.
No
(Default setting) No function.
Yes Deletes all log files on the CF card.
Head dot test
9864
Checks the printhead for defective dots and prints a status printout (see
Fig. 14) listing any defective dots.
¯
CAUTION! - Do not turn off the printer while the dot check is running! The
printhead may be damaged!
During the test, you see
¯
The printout requires 4-inch (100 mm) wide and 8-inch (200 mm) long
material.
[20] Status printout after a dot check. Upper section: technical data of the printhead; Lower
section: list of defective dots.
¯
The dot check can also be started by pressing the Cut+Feed in offline
mode, but no status report prints.
Head dot test
running ...