Avery Dennison Monarch 9864 Info Printouts and Parameters - Manual (Page 54)

06/08 Rev. AB USER MANUAL Info-Printouts & Parameters
9844 - 9854 - 9864
54
Early dottest
9864
¯
Only if SYSTEM PARAMETER > Autom. dot check = Continuous.
Earliest dot check
Sets the number of printed labels after which the dot check is performed.
Example:
The setting 3 means the dot check starts in the first printing pause after three
printed labels. After the dot check is successful, it is scheduled again after
three labels print.
after x label Setting range: 1 to 9999; Unit interval: 1; default setting: 10
Latest dottest
9864
¯
Only if SYSTEM PARAMETER > Autom. dot check = Continuous.
Sets the number of printed labels after which the dot check must be
completed.
Example:
The setting 5 means the dot check must be completed after printing five
labels. If necessary, printing is interrupted after the fifth label. After the dot
check is successful, it is scheduled again after five labels print.
after x label
Setting range: 1 to 9999; Unit interval: 1; default setting: 0
¯
The setting 0 means the dot check may never be finished if the printer has
many print jobs because a printing pause is never forced.
¯
The value for Latest dottest must be set higher than the value for Early
dottest! (exception: value 0).