Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM - Manual (Page 575)

VHDL AXI3 and AXI4 Monitor BFMs
set_address_ready_delay()
Mentor VIP AE AXI3/4 User Guide, V10.2b 555
September 2013
set_address_ready_delay()
This AXI3 nonblocking procedure sets the address_ready_delay field for a transaction that is
uniquely identified by the transaction_id field previously created by the
create_monitor_transaction() procedures.
Note
You do not normally use this procedure in a monitor test program.
Prototype set_address_ready_delay
(
address_ready_delay: in integer;
transaction_id : in integer;
bfm_id : in integer;
path_id : in axi_path_t; --optional
signal tr_if : inout axi_vhd_if_struct_t
);
Arguments address_ready_delay Address channel ARREADY/AWREADY delay measured in
ACLK cycles for this transaction. Default: 0.
transaction_id Transaction identifier. Refer to “Overloaded Procedure
Common Arguments” on page 203 for more details.
bfm_id BFM identifier. Refer to “Overloaded Procedure Common
Arguments” on page 203 for more details.
path_id (Optional) Parallel process path identifier:
AXI_PATH_0
AXI_PATH_1
AXI_PATH_2
AXI_PATH_3
AXI_PATH_4
Refer to “Overloaded Procedure Common Arguments” on
page 203 for more details.
tr_if Transaction signal interface. Refer to “Overloaded Procedure
Common Arguments” on page 203 for more details.
Returns None