Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM - Manual (Page 436)

Mentor VIP AE AXI3/4 User Guide, V10.2b 416
VHDL AXI3 and AXI4 Slave BFMs
set_address_valid_delay()
September 2013
set_address_valid_delay()
This nonblocking procedure sets the address_valid_delay field for a transaction that is uniquely
identified by the transaction_id field previously created by the
create_slave_transaction()
procedure.
Note
You do not normally use this procedure in a slave test program.
Prototype -- * = axi| axi4
-- ** = AXI | AXI4
set_address_valid_delay
(
address_valid_delay: in integer;
transaction_id : in integer;
bfm_id : in integer;
path_id : in *_path_t; --optional
signal tr_if : inout *_vhd_if_struct_t
);
Arguments address_valid_delay Address channel ARVALID/AWVALID delay measured in ACLK
cycles for this transaction. Default: 0.
transaction_id Transaction identifier. Refer to “Overloaded Procedure
Common Arguments” on page 203 for more details.
bfm_id BFM identifier. Refer to “Overloaded Procedure Common
Arguments” on page 203 for more details.
path_id (Optional) Parallel process path identifier:
**_PATH_0
**_PATH_1
**_PATH_2
**_PATH_3
**_PATH_4
Refer to “Overloaded Procedure Common Arguments” on
page 203 for more details.
tr_if Transaction signal interface. Refer to “Overloaded Procedure
Common Arguments” on page 203 for more details.
Returns None