Set_write_strobes() – Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM User Manual
Page 275
VHDL AXI3 and AXI4 Master BFMs
set_write_strobes()
Mentor VIP AE AXI3/4 User Guide, V10.2b
257
September 2013
set_write_strobes()
This nonblocking procedure sets the write_strobes field array elements for a write transaction
that is uniquely identified by the transaction_id field previously created by the
Prototype
-- * = axi| axi4
-- ** = AXI | AXI4
set_write_strobes
(
write_strobes : in std_logic_vector (**_MAX_BIT_SIZE-1 downto
0) | integer;
index : in integer; --optional
transaction_id : in integer;
bfm_id : in integer;
path_id : in *_path_t; --optional
signal tr_if : inout *_vhd_if_struct_t
);
Arguments
write_strobes
Write strobes array.
index
(Optional) Array element index number for write_strobes.
transaction_id
Transaction identifier. Refer to
on page 203 for more details.
bfm_id
BFM identifier. Refer to
“Overloaded Procedure Common Arguments”
on page 203 for more details.
path_id
(Optional) Parallel process path identifier:
**_PATH_0
**_PATH_1
**_PATH_2
**_PATH_3
**_PATH_4
Refer to
“Overloaded Procedure Common Arguments”
on page 203 for
more details.
tr_if
Transaction signal interface. Refer to
on page 203 for more details.
Returns
None