Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM - Manual (Page 513)

VHDL AXI3 and AXI4 Monitor BFMs
set_config()
Mentor VIP AE AXI3/4 User Guide, V10.2b 493
September 2013
AXI3 Example
set_config(AXI_CONFIG_SUPPORT_EXCLUSIVE_ACCESS, 1, bfm_index,
axi_tr_if_0(bfm_index));
set_config(AXI_CONFIG_BURST_TIMEOUT_FACTOR, 1000, bfm_index,
axi_tr_if_0(bfm_index));
AXI4 Example
set_config(AXI4_CONFIG_SUPPORT_EXCLUSIVE_ACCESS, 1, bfm_index,
axi4_tr_if_0(bfm_index));
set_config(AXI4_CONFIG_BURST_TIMEOUT_FACTOR, 1000, bfm_index,
axi4_tr_if_0(bfm_index));
(AXI4) Configuration name:
AXI4_CONFIG_SETUP_TIME
AXI4_CONFIG_HOLD_TIME
AXI4_CONFIG_BURST_TIMEOUT_FACTOR
AXI4_CONFIG_MAX_TRANSACTION_TIME_FACTOR
AXI4_CONFIG_ENABLE_RLAST
AXI4_CONFIG_ENABLE_SLAVE_EXCLUSIVE
AXI4_CONFIG_ENABLE_ALL_ASSERTIONS
AXI4_CONFIG_ENABLE_ASSERTION
AXI4_CONFIG_MAX_LATENCY_AWVALID_
ASSERTION_TO_AWREADY
AXI4_CONFIG_MAX_LATENCY_ARVALID_
ASSERTION_TO_ARREADY
AXI4_CONFIG_MAX_LATENCY_RVALID_
ASSERTION_TO_RREADY
AXI4_CONFIG_MAX_LATENCY_BVALID_
ASSERTION_TO_BREADY
AXI4_CONFIG_MAX_LATENCY_WVALID_
ASSERTION_TO_WREADY
AXI4_CONFIG_ENABLE_QOS
AXI4_CONFIG_READ_DATA_REORDERING_DEPTH
AXI4_CONFIG_SLAVE_START_ADDR
AXI4_CONFIG_SLAVE_END_ADDR
config_val Refer to “Monitor BFM Configuration” on page 486 for
description and valid values.
bfm_id
BFM identifier. Refer to “Overloaded Procedure Common
Arguments” on page 203 for more details.
path_id (Optional) Parallel process path identifier:
**_PATH_0
**_PATH_1
**_PATH_2
**_PATH_3
**_PATH_4
Refer to “Overloaded Procedure Common Arguments” on
page 203 for more details.
tr_if Transaction signal interface. Refer to “Overloaded Procedure
Common Arguments” on page 203 for more details.
Returns None