Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM - Manual (Page 374)

Mentor VIP AE AXI3/4 User Guide, V10.2b 354
VHDL AXI3 and AXI4 Slave BFMs
get_config()
September 2013
get_config()
This nonblocking procedure gets the configuration of the slave BFM.
Prototype -- * = axi| axi4
-- ** = AXI | AXI4
procedure get_config
(
config_name : in std_logic_vector(7 downto 0);
config_val : out std_logic_vector(**_MAX_BIT_SIZE-1 downto
0)| integer;
bfm_id : in integer;
path_id : in *_path_t; --optional
signal tr_if : inout *_vhd_if_struct_t
);
Arguments config_name (AXI3) Configuration name:
AXI_CONFIG_SETUP_TIME
AXI_CONFIG_HOLD_TIME
AXI_CONFIG_MAX_TRANSACTION_TIME_FACTOR
AXI_CONFIG_TIMEOUT_MAX_DATA_TRANSFER
AXI_CONFIG_BURST_TIMEOUT_FACTOR
AXI_CONFIG_WRITE_CTRL_TO_DATA_MINTIME
AXI_CONFIG_MASTER_WRITE_DELAY
AXI_CONFIG_MASTER_DEFAULT_UNDER_RESET
AXI_CONFIG_SLAVE_DEFAULT_UNDER_RESET
AXI_CONFIG_ENABLE_ALL_ASSERTIONS
AXI_CONFIG_ENABLE_ASSERTION
AXI_CONFIG_MAX_LATENCY_AWVALID_ASSERTION_
TO_AWREADY
AXI_CONFIG_MAX_LATENCY_ARVALID_ASSERTION_
TO_ARREADY
AXI_CONFIG_MAX_LATENCY_RVALID_ASSERTION_
TO_RREADY
AXI_CONFIG_MAX_LATENCY_BVALID_ASSERTION_
TO_BREADY
AXI_CONFIG_MAX_LATENCY_WVALID_ASSERTION_
TO_WREADY
AXI_CONFIG_READ_DATA_REORDERING_DEPTH
AXI_CONFIG_SLAVE_START_ADDR
AXI_CONFIG_SLAVE_END_ADDR
AXI_CONFIG_MASTER_ERROR_POSITION
AXI_CONFIG_SUPPORT_EXCLUSIVE_ACCESS
AXI_CONFIG_MAX_OUTSTANDING_WR
AXI_CONFIG_MAX_OUTSTANDING_RD