Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM User Manual
Page 56
Mentor VIP AE AXI3/4 User Guide, V10.2b
38
SystemVerilog AXI3 and AXI4 Master BFMs
Master Assertions
September 2013
set_config(AXI_CONFIG_ENABLE_ALL_ASSERTIONS,0)
Alternatively, individual built-in assertions can be disabled by using a sequence of
and
commands on the respective assertion. For example, to disable assertion
checking for the AWLOCK signal changing between the AWVALID and AWREADY handshake
signals, use the following sequence of commands:
// Define a local bit vector to hold the value of the assertion bit vector
bit [255:0] config_assert_bitvector;
// Get the current value of the assertion bit vector
config_assert_bitvector = bfm.get_config(AXI_CONFIG_ENABLE_ASSERTION);
// Assign the AXI_LOCK_CHANGED_BEFORE_AWREADY assertion bit to 0
config_assert_bitvector[AXI_LOCK_CHANGED_BEFORE_AWREADY] = 0;
// Set the new value of the assertion bit vector
bfm.set_config(AXI_CONFIG_ENABLE_ASSERTION, config_assert_bitvector);
Note
Do not confuse the AXI_CONFIG_ENABLE_ASSERTION bit vector with the
AXI_CONFIG_ENABLE_ALL_ASSERTIONS global enable/disable.
To re-enable the AXI_LOCK_CHANGED_BEFORE_AWREADY assertion, follow the above
code sequence and assign the assertion in the AXI_CONFIG_ENABLE_ASSERTION bit vector
to 1.