Get_write_response_phase(), Axi3 example, Ll the – Altera Mentor Verification IP Altera Edition AMBA AXI3/4TM User Manual

Page 345: Procedure to

VHDL AXI3 and AXI4 Master BFMs

get_write_response_phase()

Mentor VIP AE AXI3/4 User Guide, V10.2b

327

September 2013

get_write_response_phase()

This blocking procedure gets a write response phase that is uniquely identified by the
transaction_id argument previously created by the

create_write_transaction()

procedure. It sets

the transaction_done field to 1 when the transaction completes to indicate the whole transaction
is complete.

Note

For AXI3 the get_write_response_phase() also sets the BREADY protocol signal at the
appropriate time defined by the transaction record write_response_ready_delay field
when the phase completes.

AXI3 Example

-- Create a write transaction with start address of 0.
-- Creation returns tr_id to identify the transaction.
create_write_transaction(0, tr_id, bfm_index, axi_tr_if_0(bfm_index));

....

-- Get the write response phase for the tr_id transaction.
get_write_response_phase(tr_id, bfm_index, axi_tr_if_0(bfm_index));

Prototype

-- * = axi| axi4
-- ** = AXI | AXI4
procedure get_write_response_phase
(

transaction_id : in integer;
bfm_id : in integer;
path_id : in *_path_t; --optional
signal tr_if : inout *_vhd_if_struct_t

);

Arguments

transaction_id

Transaction identifier. Refer to

“Overloaded Procedure Common

Arguments”

on page 203 for more details.