Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 84)

4.4 Expansion cards
4 Function Description
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-52
2
D
500 kBit/s
2
D
… 9
D
Example = 4
There are two options:
1.
You can set the transmission rate using
the terminal commands DNBAUD x,
SAVE, COLDSTART, where "x" stands
for 125, 250 or 500.
2.
You can set the transmission rate of
the DeviceNet object (Class 0x03, At-
tribute 2) to a value between 0 and 2.
You can use a DeviceNet commission-
ing tool to do this. You must save the
parameters in non-volatile memory
(Class 0x25, Attribute 0x65) and restart
the drive after changing the transmis-
sion rate.
Switch setting Value Description
Baudrate
6
7
8
4
3
2
0 1 9
5
Baudrate
6
7
8
4
3
2
0 1 9
5