Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 32)

3.4 Stop and E-STOP functions
3 Safety
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
3-10
must be maintained. The circuit that is used will depend on the require-
ments of the respective application.
Brakes on servo motors usually only operate as a holding brake.
The necessary dynamic braking torque must be tested in order to guar-
antee an E-STOP function. If a holding brake meets the dynamic require-
ments, the fact that this application will cause increased wear must be
taken into account.