Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 206)

8.6 PMCprotego D.24
8 Technical Details
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
8-16
8.6 PMCprotego D.24 1600 PMCprotego D.24 8- ][Technische Daten_protego_D
Technical details
Electrical data
Power element
Mains voltage AC
208 - 480 V
Voltage tolerance -10 %/+10 %
Power consumption in S1 mode 18.0 kVA
Frequency range AC 50 - 60 Hz
Max. switch-on frequency 30/h
Continuous output current at 3 x 400 VAC 24.0 A
Peak output current for 2 s 48.00 A
Peak output current for 5 s 48.00 A
Tolerance -3 %/+3 %
Clock frequency of inverted rectifier
in normal mode
8 kHz
with current reduced to 60 % 16 kHz
Rated intermediate circuit voltage 290 - 675 V
Power dissipation
without brake
330 W
with inverted rectifier switched off 25 W
Brake chopper
Switch-on threshold for brake resistor
720 V
Shutdown at Overvoltage 800 V
Internal brake resistor R
Bi
23 Ohm
Continuous output R
Bi
200 W
Pulse output R
Bi
, max. 1 s 3.55 kW
External brake resistor R
Be
23 Ohm
Continuous output R
Be
4.0 kW
Pulse output R
Be
, max. 5 s 23.00 kW
Supply voltage 24 VDC
Supply voltage U
B
DC 24 VDC
Tolerance
with brake
+15 %
without brake +15 %
Max. current consumption
with brake
3.0 A
without brake 1.0 A
Current range, brake 0.15 - 2.00 A
Digital inputs
Number depends on the configuration
4 - 6
Input voltage 24 V DC
Signal level at "0" -3 - +5 V DC
Signal level at "1" 15 - 30 V DC
Input current at signal level "0" 1 mA
Input current at signal level "1" 2 - 15 mA
Scan rate DIGITAL-IN-1 and 2 500 kHz
Scan rate DIGITAL-IN-3 and 4 4 kHz
STO1-ENABLE, STO2-ENABLE
Number
1
Input voltage 20 - 30 V
Input current at signal level "1" 33 - 40 mA