Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 184)

7.4 LEDs and keys
7 Commissioning
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
7-12
7.4.2 Standard menu
Standard menu 7- ][Inbetrieb_Menu_Standard
Once the servo amplifier is switched on you will have access to the sta-
tus, error and warning messages via the standard menu.
The diagram below shows how the display is structured.
Fig. 7-3: Standard menu display
Reading data from EnDat
Restart interlock activated
Reset input active
Reset function is assigned to an input.
"1" signal is present.
Status 1: 24 V switched on
Unit indicates basic software version
Switches to status 2, 3 or 4 after 1 s
Status 2: 24 V switched on
Unit indicates currrent coding
Flashing dot
Status 3: 24 V switched on, mains voltage on
Unit indicates current coding and mains voltage on
Flashing dot
Status 4: 24 V switched on, mains voltage on, enable
Unit indicates current coding, mains voltage on, enable
Flashing dot
Error/warning messages: all errors or warnings
that occur are displayed in succession for
4 flash cycles
Parameter
Power on