Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 160)

6.8 Expansion cards
6 Wiring
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
6-56
6.8 Expansion cards 6800 Expansion cards 6- 6.8.1 Expansion card PMCprotego S1, PMCprotego S2
Expansion card PMCprotego S1, PMCprotego S2 6- ][Verdr_Erw_protego_S
The wiring for the safety cards is described in detail in the operating
manuals for the PMCprotego S1 and PMCprotego S2.
6.8.2 Expansion card I/O-14/08
Expansion card I/O-14/08 6- ][Verdr_Leiterquerschnitte_Verweis
Under “Connection cables”, please note the requirements for the:
` Cable cross sections
` Insulation material
][Verdr_Erw_I_O_14_8_protego_D
The assignment of the inputs and outputs in the tables below is the de-
fault setting (“Connector pin assignment” table, under “Designation”). It
can be changed at any time in the commissioning software (see chapter
entitled “Function Description” for details of the expansion card).
Connector pin assignment
Connector X11A Pin Designation Description
1 A0 Digital input
2 A1 Digital input
3 A2 Digital input
4 A3 Digital input
5 A4 Digital input
6 A5 Digital input
7 A6 Digital input
8 A7 Digital input
9 Reference Digital input
10 S_fehl_clear Digital input
11 FStart_Folge Digital input
12 FStart_Tipp x Digital input
34
5
6
12
7
8
9
1011
12
X11A