Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 13)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
2-1
2.1 Unit structure
2 Overview
2 2000 Overview Overview 2- 2.1 Unit structure 2100 Unit structure 2- 2.1.1 Unit features
Unit features 2- ][Ueber_Geraeteaufbau_protego_D
The PMCprotego D is a compact servo amplifier consisting of:
` A power element
` A control element with
– Inputs and outputs
– Sequence control
– Control loops for current, speed and position
– Interfaces for communication with the periphery
Unit types:
` Units are available with a range of output currents and widths
2.1.1.1 Power element
Power element 2- Ueber_Merkmale_Leistungsteil_protego_D
The servo amplifier's power element has the following features:
` Connection to earthed three-phase supplies, rated voltage range
208 V – 480 V
` TN network and TT network with earthed star point, symmetrical rated
current, connection to other networks only with isolating transformer
` B6 rectifier bridge integrated directly on the three-phase, earthed net-
work, mains filter and start-up circuit
` Single-phase supply possible (e.g. for commissioning or set-up
mode)
` Fuse protection (e.g. blow-out fuse) through user
` All shield connections directly on the servo amplifier
` Max. intermediate circuit voltage in generator mode: 260 – 900 VDC,
can be connected in parallel
` Brake chopper, brake power distributed over several amplifiers on the
same intermediate circuit
` Internal brake resistor is standard, external brake resistor available on
request
` Inverted rectifier with isolated current measurement and IGBT transis-
tors
` Device types with continuous output currents from 1.5 A - 24 A
` Device types with increased peak output currents (-P option, see type
code and technical details)
` Connection of synchronous servo motors, linear motors, asynchro-
nous motors
][Ueber_Merkmale_Entstoerfilter ` Integrated noise suppression filters in accordance with EN 61800-3