Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 119)

Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
6-15
6.6 Power element
6 Wiring
6.6 Power element 6600 Power element 6- 6.6.1 Mains voltage
Mains voltage 6- ][Verdr_Leiterquerschnitte_Verweis
Under “Connection cables”, please note the requirements for the:
` Cable cross sections
` Insulation material
][Verdr_Netz_protego_D
Please note the following important points under “Mains voltage”, in the
chapter entitled “Function Description”:
` The mains voltage requirements (network configurations)
` The use of isolating transformers
Connector pin assignment
Connector X0 Pin Designation Description
1 PE Earth conductor
2 L3 Mains voltage phase L3
3 L2 Mains voltage phase L2
4 L1 Mains voltage phase L1
Connection
Mains voltage for power element Three-phase
X0
1 PE
2 L3
3 L2
4 L1
1
L3
2
3
4
PMCprotego X0
L1
L2
PE
L3
L1
L2
PE
FN3
FN1
FN2