Pilz PMCprimo DriveP.01/AA0/4/0/0/208-480VAC - Manual (Page 60)

4.3 Control element
4 Function Description
Pilz GmbH & Co. KG, Felix-Wankel-Straße 2, 73760 Ostfildern, Germany
Telephone: +49 711 3409-0, Telefax: +49 711 3409-133, E-Mail: [email protected]
4-28
` Suitable as feedback for drive tasks requiring high precision position-
ing or extremely good synchronisation.
Parameter setting:
SinCos encoder with EnDat interface (X1)
Functions:
` SinCos encoder with EnDat interface connected as a primary or sec-
ondary feedback system.
` Single-turn or multi-turn
` Suitable as feedback for drive tasks requiring high precision position-
ing or extremely good synchronisation.
Parameter setting:
SinCos encoder with BISS interface (X1)
Functions:
` SinCos encoder with BISS interface connected as a primary feedback
system.
` Single-turn or multi-turn
Parameter setting:
Encoder type Parameter FBTYPE Parameter EXTPOS Parameter GEAR-
MODE
HIPERFACE 2 9 9
Encoder type Parameter FBTYPE Parameter EXTPOS Parameter GEAR-
MODE
EnDat 2.1 4 8 8
EnDat 2.1 and wake & shake 21 8 8
EnDat 2.2 32 13 13
Encoder type Parameter FBTYPE Parameter EXT-
POS Parameter
GEARMODE Supply voltage Up
5 V digital (BISS B) 20 11 11 5 V +/-5%
12 V digital (BISS B) 22 11 11 7.5 – 11 V
5 V digital (BISS C) 33 12 12 5 V +/-5%
12 V analogue (BISS B) 23 - - 5 V +/-5%
12 V analogue (BISS B) 24 - - 7.5 – 11 V